Figure 90. Removing the 2.5 Inch (x24) SAS/SATA plus (x8) PCIe SSD backplane
1
primary PCIe SSD extender mini-SAS HD connector (4) 2 release tab (2)
3 secondary PCIe SSD extender mini-SAS HD connector (4) 4 hard drive connector (24)
5 backplane hook (8) 6 backplane power cable (2)
7 power connector on the system board (2) 8 memory riser guide
9 miscellaneous signal connector on the system board 10 backplane miscellaneous signal cable
11 guide 12 backplane jumper connector
13 expander connector
158 Installing and removing system components
To Next Page
Loading...
