Dell Precision M6600 - LVDS Camera Cable Servicing; Removing the LVDS Camera Cable

Low-Voltage Differential Signaling
(LVDS) Camera Cable 35
Removing The Low-Voltage Differential Signaling (LVDS) Camera Cable
1. Follow the procedures in
Before Working On Your Computer .
2. Remove the battery .
3. Remove the
base cover .
4. Remove the keyboard trim .
5. Remove the keyboard .
6. Remove the optical drive .
7. Remove the
primary hard drive .
8. Remove the secondary hard drive .
9. Remove the palm rest .
10. Remove the display assembly .
11. Remove the standard display bezel or the touchscreen display bezel .
12. Remove the
standard display panel or the touchscreen display panel .
13. Remove the display hinge, hinge cap, hinge tower .
14. Disconnect the low-voltage differential signaling (LVDS) and camera cable
from the camera.
15. Pry up the LVDS and camera cable from the display cover.
107