Dell S3425DW - Page 44

44
Operating the monitor
Icon Menu and submenu Description
Input Source Select between the different video signals that may be connected to your monitor.
USB-C 65W
Select USB-C 65W when you are using the USB-C upstream port. Press the joystick to
confirm the selection.
HDMI 1
Select HDMI 1 when you are using the HDMI port. Press the joystick to confirm the
selection.
HDMI 2
Select HDMI 2 when you are using the HDMI port. Press the joystick to confirm the
selection.
Rename Inputs Allows you to specify a preset input name for the selected input source. The preset options
are PC, PC 1, PC 2, Laptop, Laptop 1, and Laptop 2. By default, the setting is Off.
NOTE: When you perform a rename for the USB-C (65W) input, the wattage value
remains after the specified option, for example, PC 1 (65W).
NOTE: It is not applicable for the input names shown in the warning messages and
Display Info.
Auto Select Automatically scans for available input sources. The default is On. Press the joystick to
confirm the selection.
Options for USB-C
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs: Always displays the Switch to USB-C Video Input
message for you to choose whether to switch or not.
• Always Switch: Automatically switches to USB-C video input (without prompting)
when the USB-C cable is connected.
• Off: Never switches to USB-C video input when the USB-C cable is connected.
Press the joystick to confirm the selection.
NOTE: This function is not available when Auto Select is set to Off.
Options for HDMI Allows you to set the function to:
• Prompt for Multiple Inputs: Always displays the Switch to HDMI Video Input
message for you to choose whether to switch or not.
• Always Switch: Automatically switches to HDMI video input (without prompting)
when the USB-C or HDMI cable is connected.
• Off: Never switches to HDMI video input when the HDMI cable is connected.
Press the joystick to confirm the selection.
NOTE: This function is not available when Auto Select is set to Off.
Reset Input Source
Resets Input Source to the default settings.