ACCESSORIES
TROUBLESHOOTING
For assistance with your machine, visit our website at www.DeltaMachinery.com for a list of service centers or call DELTA
®
Customer
Service at (toll free) 1-800-223-7278 or email at Customercare@dpec-na.com.
FAILURE TO START
If your machine fails to start, check to make sure the prongs on the cord plug are making good contact in the receptacle, and check reset
button on “GFI” receptacle (If applicable). Also, check for blown fuses or open circuit breakers in your power line.
Question: Solution:
How do you make the blade parallel to the miter slot? Reference Page 21.
Can this unit be converted to 220 volt? No.
What do I do if I have a problem with my Fence? Reference page 24. If the problem still exists, contact the Customer
Care team by calling 1-800-223-7278 or emailing Customercare@
dpec-na.com.
What do I do if I have a problem with my Stand? Reference page 13. If the problem still exists, contact the Customer
Care team by calling 1-800-223-7278 or emailing Customercare@
dpec-na.com.
What do I do if my unit has no power? Begin by checking the “POWER SOURCE” and “EXTENSION CORDS”
sections on page 9 to ensure you are utilizing the machines power
appropriately. If the problem continues, contact our Customer Care
line at 1-800-223-7278 or emailing Customercare@dpec-na.com.
How do I nd my local repair center? Contact our Customer Care team by calling 1-800-223-7278 or
emailing us at Customercare@dpec-na.com.
How do I get Warranty work done on my product? KEEP a copy of your receipt to present to our Service Center if any
issues arise with your machine.
A complete line of accessories is available from your DELTA
®
Supplier, DELTA
®
Factory Service Centers, and DELTA
®
Authorized Service
Centers. Please visit our Web Site www.DeltaMachinery.com for an online catalog or for the name or your nearest supplier.
Since accessories other than those oered by DELTA
®
have not been tested with this product, use of such
accessories could be hazardous. For safest operation, only DELTA
®
recommended accessories should be used with this
product.
38 39
To Next Page
Loading...
