Delta AHCPU560-EN2 Series - Ethernet Link Object (Class ID: 16#F6)

EtherNet/IP Operation Manual
8-20
_8
Instance
Attribute
Name
Access
Rule
Data Type Values Description
16#06 Host Name Get/Set STRING AH10EN-5A
Device name
AH10EN-5A: “AH10EN-5A”
AHRTU-ETHN-5A:
“AHRTU-ETHN-5A”
AHCPU511-EN: “AHCPU511-EN”
AHCPU521-EN: “AHCPU521-EN”
AHCPU531-EN: “AHCPU531-EN”
※1 Interface Status
Status
Description
0 The Interface Configuration attribute has not been configured.
1
The Interface Configuration attribute contains valid configuration obtained from BOOTP, DHCP or
non-volatile memory.
2 The Interface Configuration attribute contains valid configuration obtained from hardware.
※2 Interface Capability Flags
Bit
Description
0 BOOTP Client
1 DNS Client
2 DHCP Client
3 DHCP-DNS Update
4 Configuration Settable
5 Hardware Configurable
6 Interface Configuration Change Requires Reset
※3 Interface Configuration Control
Status
Description
0
The device shall use the interface configuration values previously stored (for example, in non-volatile
memory or via hardware witches).
1 The device shall obtain its interface configuration values via BOOTP.
2 The device shall obtain its interface configuration values via DHCP upon start-up.
8.11 Ethernet Link Object (Class ID: 16#F6)
It maintains link-specific counters and status information for an IEEE 802.3 communications interface.
 Service Code
Service
Code
Service Name
Support
Description
Class Attribute Instance Attribute
16#01 Get_Attributes_All X V
Returns a predefined listing of this
objects attributes
16#0E Set_Attribute_Single V V Write one attribute
16#4C Get_and_Clear X V
Clear the contents of the attribute
Once the attribute is read.
For devices that support Instance
Attribute 4 or 5, this service code
Get and Clear will be available.