Delta VFD-V Series User Manual

8
VFD-V Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
8-11
Control Mode
Parameters Functions Settings
Factory
Setting
VF VG SV SG T TG
17: PCO Run
{ { { { ° °
18: PCO suspended
{ { { { ° °
19: 1
st
step of PCO completed
{ { { { ° °
20: PCO completed
{ { { { ° °
21: pre-set counter value attained
{ { { { { {
22: desired counter value attained
{ { { { { {
23: heat sink overheat warning
{ { { { { {
24: operation frequency attained 1
(both directions)
{ { { { ° °
25: operation frequency attained 2
(both directions)
{ { { { ° °
26: pre-set frequency attained 1
(both directions)
{ { { { { {
27: pre-set frequency attained 2
(forward only)
{ { { { { {
28: pre-set frequency attained 1
(both directions)
{ { { { { {
29: pre-set frequency attained 2
(forward only)
{ { { { { {
30: software braking output
{ { { { { {
31: position achieved
{ ° { ° { °
32~47: PCO step indication
{ { { { ° °
48~63: multi-step indication
{ { { { ° °
64: PG Fault
{ ° { ° { °
65: PG Stall
{ ° { ° { °
69: over-torque(oL3)
{ { { { { {
70: Zero speed (STOP)
{ { { { { {
71: Position synchronization 1
(10-10)
{ { { { { {
a
02-14 Multi-Function
Output 4 (MO2)
72: Position synchronization 2
(10-23)
13
{ { { { { {
a
02-15
Multi-Function
Output Direction
0~15 (1 high) 00000
{ { { { { {
a
02-16
Counter Values
Achieve the
Pre-Set Values
0~65500 0
{ { { { { {
a
02-17
Designated
Counter Value
Achieved
0~65500 0
{ { { { { {
a
02-18
Digital Output
Gain
1~40 1
{ { { { { {

Delta VFD-V Series Specifications

General

Brand	Delta
Model	VFD-V Series
Category	Controller
Language	English