Denon AVR-4520 - Page 36

Conrmation item Setting and display Details of how to operate remote controller
Output sequence of remote control codes
※
It is useful to form a macro program.
Contents of conrmation Remarks
8
Amp Assign (signal) Path
(Amp Assign : ZONE2/ZONE3-MONO)
Amp assign : 7.1ch+ZONE2/3-MONO
SURROUND mode : Multi ch STEREO
ZONE2 Vol -20dB
ZONE3 Vol -20dB
Display:
A 0 9 D V D
1.Press [AVR]
2.Press [ZONE SELECT], Select "MAIN"
3.Press [
6
]
q
6
Initialization & Amp assign
7.1ch+ZONE2/3-MONO & SURROUND
mode : Multi ch STEREO & ZONE2 Volume
-20dB & ZONE3 Volume -20dB
·Input : Analog / Output : Speakers (Front wide L/R)
·Input : Analog / Output : Pre OUT (ZONE2 L/R)
·Input : Analog / Output : Pre OUT (ZONE3 L/R)
(
※
As the input source, you can switch from DVD to other ones.)
4.Press [DVD]
w
DVD (Main Zone)
9
Amp Assign (signal) Path
(Amp Assign : BiAMP)
Amp assign : 7.1ch(Bi-Amp)
SURROUND mode : Multi ch STEREO
Vol -20dB
Display:
A 1 1 D V D
1.Press [AVR]
2.Press [ZONE SELECT], Select "MAIN"
3.Press [
8
]
q
8
Initialization & Amp assign
7.1ch(Bi-Amp)
& SURROUND mode : Multi ch STEREO &
Volume -20dB
·Input : Analog / Output : Speakers (Front wide L/R)
(
※
As the input source, you can switch from DVD to other ones.)
4.Press [DVD]
w
DVD (Main Zone)
10
Front Height (signal) Path Amp assign : 9.1ch (SB/FH/FW)
SURROUND mode : Multi ch STEREO
Vol -20dB
Surround Parameter-Speaker : S.Back/F.Height
Display:
A 1 4 D V D
1.Press [AVR]
2.Press [ZONE SELECT], Select "MAIN"
3.Press [
1
]
q
1
(Main Zone)
Initialization & Amp assign
9.1ch (SB/FH/
FW)
& SURROUND mode:Multi ch STEREO
& Volume -20dB & Surround Parameter-
Speaker :
S.Back/F.Height
·Input : Analog / Output : Speakers (Front Height L/R)
(
※
As the input source, you can switch from DVD to other ones.)
4.Press [DVD]
w
DVD (Main Zone)
11
Front Wide (signal) Path Amp assign : 9.1ch (SB/FH/FW)
SURROUND mode : Multi ch STEREO
Vol -20dB
Surround Parameter-Speaker : S.Back/F.Height
Display:
A 1 5 D V D
1.Press [AVR]
2.Press [ZONE SELECT], Select "MAIN"
3.Press [SLEEP]
q
SLEEP MODE
Initialization &Amp assign
9.1ch (SB/
FH/FW)
& SURROUND mode:Multi
ch STEREO & Volume -20dB Surround
Parameter-Speaker :
S.Back/F.Height
·Input : Analog / Output : Speakers (Front wide L/R)
(
※
As the input source, you can switch from DVD to other ones.)
4.Press [DVD]
w
DVD (Main Zone)
12
External in Path Amp assign : 9.1ch (SB/FH/FW)
Input mode : Fixed EXTERNAL IN
Vol -20dB
Speaker Cong : Set as all Speakers=Small/
SW=2ch
Display:
A 1 9 D V D
1.Press [AVR]
2.Press [ZONE SELECT], Select "MAIN"
3.Press [
2
]
q
[
2
]
Initialization &Amp assign
9.1ch (SB/FH/
FW)
& Input mode : Fixed EXTERNAL
IN
·Input: External In / Output: Pre OUT (All CH)
(
※
As the input source, you can switch from DVD to other ones.)
4.Press [DVD]
w
DVD (Main Zone)
g.17
g.18
g.19
g.20
g.21
36