Denon AVR-4520 Service Manual

96
SURROUND MODES AND PARAMETERS
This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”.
Sound Mode
Channel output
Dialog Enhancer Subwoofer Level
z1 During playback in PURE DIRECT mode, the surround parameters are
the same as in DIRECT mode.
z2 A signal for each channel contained in an input signal is output as
audio.
z3 You can select speakers to output audio on the “Speaker Select”
setting in the menu.
z4 Audio is output from the front height speaker when the set sound
mode name contains “+PLgz”. For information on how to check the sound mode.
z5 Audio is output from the front height speaker when “Audyssey DSX
®
”
in the menu is set to ”Wides/Heights” or “Heights”.
z6 Audio is output from the front wide speaker when “Audyssey DSX
®
”
in the menu is set to ”Wides/Heights” or “Wides”.
z7 Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output
from the subwoofer.
Front
L/R
Center
Surround
L/R
Surround back
L/R
Front height
L/R
Front wide
L/R
Subwoofer
DIRECT/PURE DIRECT (2 channel)
z1
S D
z7
S
z7
DIRECT/PURE DIRECT (Multi-channel)
z1
S D D D
z2
D
z2
D
z2
D S
DSD DIRECT (2 channel)
z1
S D
z7
S
z7
DSD DIRECT (Multi-channel)
z1
S D D D S
EXTERNAL IN
S D D D D S
STEREO
S D S S
MULTI CH IN
S D D D D
z4
D S S
DOLBY PRO LOGIC gz S D D D D D S S
DOLBY PRO LOGIC gx S D D D D S S
DOLBY PRO LOGIC g S D D D S S
DOLBY PRO LOGIC gx A-DSX S D D D D
z5
D
z6
D S S
DOLBY PRO LOGIC g A-DSX S D D D
z5
D
z6
D S S
DTS NEO:X
S D D D
z3
D
z3
D
z3
D S S
Audyssey DSX
®
S D D D D
z5
D
z6
D S S
DOLBY DIGITAL
S D D D D
z4
D S S
DOLBY DIGITAL Plus
S D D D
z2
D
z2
D
z2
D S S
DOLBY TrueHD
S D D D
z2
D
z2
D
z2
D S S
DTS SURROUND
S D D D D
z4
D S S
DTS 96/24
S D D D D
z4
D S S
DTS-HD
S D D D
z2
D
z2
D
z2
D S S
DTS Express
S D D D D
z4
D S S
MULTI CH STEREO
S D D D
z3
D
z3
D
z3
D S S
WIDE SCREEN
S D D D
z3
D
z3
D
z3
D S S
SUPER STADIUM
S D D D
z3
D
z3
D
z3
D S S
ROCK ARENA
S D D D
z3
D
z3
D
z3
D S S
JAZZ CLUB
S D D D
z3
D
z3
D
z3
D S S
CLASSIC CONCERT
S D D D
z3
D
z3
D
z3
D S S
MONO MOVIE
S D D D
z3
D
z
3
D
z3
D S S
VIDEO GAME
S D D D
z3
D
z3
D
z3
D S S
MATRIX
S D D D
z3
D
z3
D
z3
D S S
VIRTUAL
S D S S

Denon AVR-4520 Specifications

General

Impedance	8 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/192kHz
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	150 W
HDMI in	7
Composite video in	4
USB ports quantity	1
Digital audio optical in	2
Component video (YPbPr/YCbCr) in	3
Connectivity technology	Wired
Speakers connectivity type	-
Audio formats supported	AAC, FLAC, MP3, WMA
Wi-Fi	No
Ethernet LAN	Yes
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Product color	Silver
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS Neo:X, DTS-HD
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	423 mm
Width	434 mm
Height	195 mm
Weight	16500 g