Error
Code
Details of Error code Display Coping strategies
39
Connection to DPMS timed out
when Main CPU was rewritten.
C o n n e c t i o n F a i l 3 9
Check the network connection.
Carry out the update in an
environment that has little network
load.
3A
Error (NG) message was received
when rmware was downloaded
or Main CPU was rewritten.
D o w n l o a d f a i l 3 A
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
3B
Error (line congestion) message
received when downloading
rmware when Main CPU was
rewritten.
D o w n l o a d f a i l 3 B
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
3C
Error (connection failure) message
received when downloading
rmware when Main CPU was
rewritten.
D o w n l o a d f a i l 3 C
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
3D
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM860A (AutoIP).
C o n n e c t i o n F a i l 3 D
Check the network connection.
Carry out the update in an
environment that has little network
load.
3E
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM860A (when timed out).
C o n n e c t i o n F a i l 3 E
Check the network connection.
Carry out the update in an
environment that has little network
load.
50
Log-in to DPMS failed when
rmware such as DSP and PLD was
rewritten.
L o g i n f a i l e d 5 0
Carry out the update in an
environment that has little network
load.
51
Line, etc., is busy when the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
S e r v e r i s b u s y 5 1
Carry out the update in an
environment that has little network
load.
52
Connection to DPMS failed when
rmware such as DSP and PLD was
rewritten.
C o n n e c t i o n F a i l 5 2
Check the network connection.
Carry out the update in an
environment that has little network
load.
54
Error message received regarding
rmware data after the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
U p d a t i n g f a i l 5 4
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
55
When rmware such as DSP and
PLD was rewritten, request was
made for rmware data after the
log-in to DPMS, but it timed out.
U p d a t i n g f a i l 5 5
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
56
Downloading rmware failed after
the log-in to DPMS when rmware
such as DSP and PLD was rewritten.
D o w n l o a d f a i l 5 6
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
57
Firmware download error received
(line congestion) after the log-in to
DPMS when rmware such as DSP
and PLD was rewritten.
D o w n l o a d f a i l 5 7
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
58
Firmware download error received
(connection failure) after the log-
in to DPMS when rmware such as
DSP and PLD was rewritten.
D o w n l o a d f a i l 5 8
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
5A
NACK was received when "C"
command sent to DSP, PLD etc.
C o n n e c t i o n F a i l 5 A
Turn off and on the power.
Updating starts automatically.
62
To Next Page
Loading...
Need help?
General
