Denon AVR-E400

Sound Mode NOTE
Input signal types and formats
ANALOG
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
PCM
(Multi-
channel)
PCM
(2-channel)
DTS-HD
Master
Audio
DTS-
HD High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1-channel)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL
Plus
DOLBY
DIGITAL
EX (With
Flag)
DOLBY
DIGITAL
EX (With
no Flag)
DOLBY
DIGITAL
(5.1-channel)
DOLBY
DIGITAL
(2-channel)
MULTI CH IN
MULTI CH IN
F
MULTI CH IN + PL
g
x
CINEMA
z
1
z
3
S
MULTI CH IN + PL
g
x
MUSIC
z
1
z
2
S
MULTI CH IN + PL
g
z
z
1
z
4
S
MULTI CH IN + Dolby EX
z
1
z
2
S
MULTI CH IN 7.1
z
1
z
2
F
(7.1)
DIRECT
DIRECT
S S S S S S S S S S S S S S S S
PURE DIRECT
PURE DIRECT
S S S S S S S S S S S S S S S S
DSP SIMULATION
MULTI CH STEREO
S S S S S S S S S S S S S S S S
ROCK ARENA
S S S S S S S S S S S S S S S S
JAZZ CLUB
S S S S S S S S S S S S S S S S
MONO MOVIE
S S S S S S S S S S S S S S S S
VIDEO GAME
S S S S S S S S S S S S S S S S
MATRIX
S S S S S S S S S S S S S S S S
VIRTUAL
S S S S S S S S S S S S S S S S
STEREO
STEREO
F S F S S S S S S S S S S S S S
z
1 This sound mode can be selected when “Amp Assign” is set to “Surround Back”.
z
2 If “Speaker Cong.” – “Surr. Back” is set to “None”, this sound mode cannot be selected.
z
3 If “Speaker Cong.” – “Surr. Back” is set to “1spkr” or “None”, this sound mode cannot be selected.
z
4 If “Speaker Cong.” – “Front Height” is set to “None”, this sound mode cannot be selected.
78