ENGLISH
Setting
contents
16:9 Squeeze
Auto:
Outputs to a wide screen
TV
For
4:3 video, displays
in the center
of
the screen without changing the aspect ratio. *1
WIDE (16:9) : Outputs to a wide-screen
TV.
4:3
PS
: Outputs to a 4:3
TV
For
wide
video, trim the left and right side
of
the image and display
in
4:3 aspect ratio *2
4:3
LB
: Outputs to a 4:3
TV
Displays
all
of the
wide
video.
480/576i, 480/576P, 720P, 1080i,
Source
Direct:
Outputs video using its source resolution. Converts a
1080p video source to 1080i.
Video Setup Def<lult settings
<Ire
underlined
setting items
Component Resolution *3
Sets the component output
resolution.
TV
Aspect (Aspect ratio)
Set the screen type and
display
mode
of
the TV
~
S]
Set
th,
,Id,o
outp.t
,1900'
'''00'''9
to
th,
,"oo,,"d
lV.
Setting
contents
Oa:
Super Audio
CD
audio
is
output.
Off : Super Audio
CD
audio
is
not output.
#
The Super Audio
CD
audio signal
is
a
44.1
kHz/16-bit Linear
PCM
output
[Multi LPCM BM Off] : Decoded Linear PCM multi-channel signal
is
output by the
DBP-A
100. This setting
is
not made in speaker settings.
(BM: Bass Management)
[2Ch] : Outputs the downmixed 2-channel LPCM signal.
[Mute] : Does not output audio
from
HDMI.
Setting items
HDMI Setup
Audio Setup
SA-CD Audio Out
Sets
to
outpurthe
stereo!
multi area audio
of
Super
Audio
CD
to
the HDMI
terminal.
I
*1 :This has
no
effect on the video and S-Video outputs.
*2 : Depending
on
the video content. even though you set it to 4:3
PS
(Pan
Scan). the content may be
output
in
4:3
LB
(Letter Box).
*3 .When video
is
output from the HDMI terminal,
no
video signal
is
output from the component
terminals.
HOMI Control
Can
operate the unit in
conjunction with
an
HOMI
control supported device.
[Control]
•Off: Disables the HDMI control function.
•
On
: Links with the device connected
to
HDML
[Power Off Control]
•
On:
Turns the
DBP-A
1
OD's
power to standby through linkage to the
TV
• Off : Does not turn the
DBP-A
1
OD's
power to standby through linkage
to the
TV
•
For
the HDMI control function
to
operate, it
is
necessary for the
DBP-
A100 or HOMI-compatible
TV
connected to the
DBP-A
100 to have
an
HDMI connection.
• Refer to "HDMI Control Function" (iGf'page 449) for more information
on HDMI control functions.
• The HDMI control function from the connected device
is
enabled when,
on the
GUI
menu, "DENON LINK Setup" - "DENON
LINK
Mode"
is
set
to "4th" (iGf'page 28).
• After the "HDMI Control" setting has been changed, always turn off the
power
to the connected equipment and then turn it back on.
Progressive Mode
Sets
an
appropriate
progressive conversion
mode
for
the source video
material.
TV
Active Area
Sets the horizontal display
range when the analog
video
output
resolution
is
480i/576i.
AutQ
: Detects the type
of
video material and automatically switches the
mode. Normally, this setting
is
used.
Videol : Suitable for playing video material discs.
Video2 : Suitable for playing video material discs or 3D-frame film material
discs.
Eull
: Setting when a home-use monitor
is
connected.
Normal:
This setting
is
used when video synchronization
is
disturbed on
a professional-use
monitor
, This
is
not available for HDMI output.
'NtU4
If
you set "DENON
LINK
Setup" - "DENON
LINK
Mode"
on
the
GUI
menu to "4th". you will no longer be
able to change the "HDMI Control" - "Control" setting
To
change the setting, switch the "DENON
LINK
Mode" to a setting other than "4th" first
and
then change the setting.
24
Remote control oper<ltion
buttons
.Displays the menu
Cancels the menu
Moves the cursor
(U
p/Down/Left/Right)
8 :Makes the setting
RETURN
o
.Returns to previous menu