Denon DBP-A100 User Manual

ENGLISH
Setting the Audio Mode Default settings are underlined.
2 Select a setting item using <:I:> <:0, and then press 8 or 8.
HDMI / Component: Audio output is synchronized to the video output
from the HDMI terminal or component terminals.
S-Vldeo /Video : Audio output is synchronized to the video output from
the S-Video or Video terminals.
Setting contents
Off : Does not display Secondary Video(Picture-ln-picture).
1/X * :Displays the first Secondary Video.
2/X * :Displays the second Secondary Video.
X/X * :Displays the X th Secondary Video.
*:"X" is the number of Secondary Videos recorded and differs
depending
on the disc ("Playing Bonus View" ~page 36)
.0 - 200msec : Use this to adjust the audio output delay time manually.
Off : Displays the source video signal without modification. This should
normally
be set to "Off".
On : Set when viewing cinemascope size video with a combination of
projector and anamorphic lens. Extends the image vertically so that the
top
and bottom black portions disappear.
'Nln-
This has no effect with the video and S-Video outputs.
Making Other Settings DefauJt settings are underlined.
Vertical Stretch
Extends the cinemascope
size video vertically.
Secondary Video (PIP)
Audio Delay Adjust
While viewing video,
manually adjust the time
to
delay audio output.
Audio/Video Sync
Corrects displaced video-
audio playback timing.
Setting items
Vertical Stretch Off
_ MIX Audio Output
File filter All
Setting contents
All: Plays MP3/wMA/AAC/LPCM/JPEG/DivX® files.
Audio: Plays MP3/WMA/AAC/LPCM files.
Picture: Plays JPEG files.
Video: Plays DivX® files.
Audio & Picture: Plays MP3/WMA/AAC/LPCM/JPEG files.
Setting contents
HD Audio Output: Can view by outputting high quality signals such as
Dolby TrueHD, Dolby Digital Plus, or DTS-HD as its high sound quality
bitstream. Cannot listen to interactive or secondary audio.
Mix Audio Output: Outputs a mix of primary audio/interactive audio/
secondary audio.
'Nln-
When "BD Audio Mode" is set to "Mix Audio Output", DTS-HD 192kHz
audio
is decoded to 96kHz.
Changing the Playback File Display Defaul~ settings aLe
underlmed.
Various Settin s
Setting items
Setting items
BD Audio Mode
Switches the BD audio
playback mode.
File filter
Selects the file formats you
wish to play from among the
files mixed
on a disc.
3 Use <:I:> <:0 to select a setting and use 8 to change the setting.
1 Press(~).
Displays a menu of items that can be set.
*The display content changes depending on the media being played.
G')
Cll
:::
:;.
IC
~
III You can set the audio mode and switch the kind of files to play.
~
~ You can make various mode settings during playback. The setting menu is displayed at the top of
the screen.
This operation is effective only when playback is stopped.
32

Denon DBP-A100 Specifications

General

Brand	Denon
Model	DBP-A100
Category	Blu-ray Player
Language	English