ENGLISH
n
g
::l
11l
n
o'
"
"
I
Setting contents
Cautions on -Firmware Update-
Cancel:
Does not initialize
OK
: Executes initialization.
[Font License)
Japanese (Original) :
Displays
in
Japanese.
The
font used
in
this product's
GUI
menu screen conforms to
IPA
font specifications.
See
the following
URL
for the
IPA
font license
agreement.
http://ipafont.ipa.go.jp/enduserlicense.html
Check for Update: Checks if a newer version of firmware exists.
You
can
also check approximately
how
long it will take to complete
an
update.
Start:
Starts firmware update.
When updating starts, the power indicator lights
red
and
the
GUI
screen
shuts down.
While updating, a rough estimate of remaining time
is
indicated
on
the
display.
When updating
is
complete the power indicator lights green and the
normal status
is
resumed.
INenM
Only use this function if
so
instructed by a
DENON
service person or
installer.
Setting items
Initialize
All settings including audio
mode
and
picture quality
are
set to default settings.
•
In
order to use these functions, you must
have
the correct system requirements
and
settings for a
broadband Internet connection (l2iFpage
19,
29).
•
Do
not turn off the power until updating
is
complete.
• Information regarding the "Firmware Update" function will
be
announced
on
the
DENON
web site
each
time related plans are decided.
•
Even
with a broadband connection to the Internet. approximately 1 hour
is
required to complete the
updating procedure.
Once updating starts, you cannot perform normal operations on the
DBP-A
100 until updating is
complete. Also, settings of the
GUI
menu of
DBP-A
100 and/or image adjustment settings may
be
initialized.
'If
a disc
is
in
the
tray,
remove it before performing "Firmware Update".
Firmware Update
Updates the firmware of the
unit
via
the Internet.
Information
Displays the license for
the
IPA
font used by this
product.
Maintenance Mode
Use when receiving
maintenance from a
DENON
service engineer or custom
installer.
power Saving
Standby:
This
is
the lowest power consumption mode.
During standby, operations
are
not accepted
via
HDMI control or
RS-232C.
Power indicator status
in
standby
mode:
Off
Normal Standby: During standby, operations are accepted
via
RS-232C.
Power consumption is slightly higher at this time.
Power indicator status
in
standby
mode:
Red
Quick Start Mode : Start
up
time
is
faster but power consumption
during standby
is
higher. Operations
are
accepted
via
HDMI Control
and
RS-232C
Power indicator status
in
standby mode:
Red
Off : Does not use the auto power mode.
On
: This setting automatically sets the power to standby if any of the
following states continues for approximately 30 minutes.
• Disc not loaded
• Playback stopped
• Stopped due to the resume function
[Remote
10)
Switches the
DBP-A
1
OO·s
remote control
10
code when other DENON
BD
Players
are
in
the vicinity.
•
DEN
ON
1 :
Set
the switch
in
the remote control battery compartment to
''1''
as
well ("Remote Control Settings (Remote Control Side)"
Grpage
7).
• DENON 2 :
Set
the switch
in
the remote control battery compartment
to
"2"
as
well ("Remote Control Settings (Remote Control
Side)"
Grpage
7).
[Receive Existing Remote Control)
Set whether or not to accept remote control signals of a
DENON
DVD
player or other device.
• On : Accepts
•
Off
: Does not accept
SO
Data
Erase
: Erases both internal memory
and
SO
Memory
Card
storage.
Initialize
SO
Card:
Initializes the
SO
card to
be
used for the Bonus View
and
BD-LiVE functions.
Setting contents
INen
M
o Insert or remove a
SO
Memory
Card
while the power
is
in
standby.
If the
SO
Memory
Card
is
inserted when the power
is
switched on,
there
are
occasions where the card cannot be read, or the
BD
cannot
be
played.
•
The
SO
card used for the Bonus View function must have a capacity of
1
GB
or greater. Also the
SO
card
must
be
initialized
on
the
DBP-A
100.
• This operation will delete
all
the data.
Do
not perform this operation
when
an
SO
card containing MP3 or
JPEG
data is inserted.
• Remove the disc from the disc tray when carrying out "BD
Data
Erase"
or "Initialize
SO
Card".
Other Setup Default
settingure
underlined.
Auto Power Mode
This setting automatically
sets the power
to
standby.
Setting items
Power Saving
Sets to power saving mode
during standby.
Remote Control Setting
(Main unit side)
Sets the remote control.
SO
Data Utility
Erases data
on
SO
Memory
Card,
and
initializes cards.
OC-lj
Se"
ath"
••
m,
Remote control operation
buttons
SETUP
0)
.Displays the menu
'Cancels the menu
.Moves the cursor
'(Up/Down/Left/Right)
e :Makes the setting
RETURN
o
:Returns to previous menu
31