ENGLISH
'N,na
With DENON
LINK
connections,
no
audio signals other than those of
BD
are output from the HDMI
terminal.
(When "DENON
LINK
Mode"
is
set to "2nd"
and
"HDMI Setup" - "SA-CD Audio Out"
(('iF
page 24)
is
set
to "On", the audio signals of Super Audio
CD
are output from the HDMI terminal.)
Setting contents
DENON LINK Setup OefilYlt settings are underlined.
Setting items
[lil
Set tho
'0"0
"''''
to
h.
ootpot
''Om
tho DENON LINK
t"m;o,L
.-
o Signals Compatible with DENON LINK Setting and Transmission
The DENON
LINK
setting for the DENON
LINK
version of the connected
AV
Amp is
as
follows:
Pure Direct Setup Oeillult settings are underlined,
Makes settings for digital audio and video output modes during Pure Direct mode,
as
well
as
for display messages. Two types of setting
can
be made.
I
OENON LINK
Mode
Sets the audio output
DENON LINK.
[Qff.] : Does not use DENON
LINK.
of
[2nd]: Outputs digital audio using DENON
LINK
2nd
[3rd] : Outputs digital audio using DENON
LINK
3rd.
[4th] : Outputs digital audio using DENON
LINK
4th.
Compatible with jitter-free connections.
For
more information. refer to
"DENON LINK Connection
CD
Making a Jitter-free Connection"
(('iF
page
17).
• HOMI : Improves HDMI digital signal
jitter
#'
• When set to "4th". the HDMI control function becomes available from
the connected device.
• When "4th"
is
set
and
jitter-free connection is set up, audio affected
by the jitter-free function
is
output from the HDMI terminal during
BD
playback. When playing back media other than that. the video signal
is
output from the HDMI terminal
and
the audio signal
is
output from the
DENON
LINK
terminal, respectively.
•
To
play DENON
LINK
4th signals. connect to a DENON
LINK
4th-compatible
AV
Amp using
an
HDMI
and
a DENON
LINK
cable.
•
For
information on the 4th setting
of
the
AV
Amp. see the owner's
manual of the
AV
Amp.
•
Setting items
User Preset
1/
User Preset 2
Sets the operating mode
for
"User Preset 1" or "User
Preset 2" selected by ~.
Setting each
of
these items
to
"Off"
enables output
of
high quality analog signals
free
of
interference from
their associated circuits.
Setting contents
[Digital Out] : Sets whether to output signals to the digital audio output
terminal.
•
Qn..:
Enables digital audio output.
•
Off:
Disables digital audio output.
[Video Out] : Sets the option of video output.
• Qn : Enables video output.
• Off : Disables video output. This setting also disables audio output from
the HDMI terminal.
[Display] : Set the option for front panel display.
• Qn : Turns on the display.
•
Off:
Turns off the display.
#'
For
more information, see "Playing Back High-quality Audio (Pure Direct
Function)"
(('iF
page 38).
"2nd"
x
,...)
u
x
~
U
'J
3rd Generation
("3rd" displayed near "3rd"
x
0 0
~
Cl
'.
'.'
terminal)
I
_.
___
.
__
-.1--
__
..
_______
....
_____
..
__
-r
4th Generation
I
("4th" displayed near "4th"
-
r)
~
terminal)
28
Remote control operation
buttons
SETUP
CD
.Displays the menu
'Cancels the menu
.Moves the cursor
(Up/Down/Left/Right)
8
:Makes the setting
RETURN
o
:Returns to previous menu
To Next Page
Loading...
Need help?
General
