ENGLISH
Audio Setup
Default
settings are underlined.
I
Setting contents
[Surr. Back] : Sets the presence, size and number of surround back
speakers.
•
Size:
Sets the surround back speaker size.
Larg.e :
For
use with large speakers that can adequately play back low
frequencies.
Small:
For
use with small speakers that cannot adequately play back
low
frequencies.
None:
Select when no surround back speakers are connected.
•
Number:
Sets the number of surround back speakers.
1 spkr : Use only one surround back speaker. Surround back audio
is
output from the surround back L terminal.
2....spkrs
: Use
two
surround back speakers.
[Crossover Freq.] : Sets the upper limit of the
low
frequency signal
output from the subwoofer.
• 40Hz/60Hz/8OHz/90Hz/1
OOHz/
11
OHz/120Hz/150Hz/200Hz/250Hz
: Keeps the output level below the set frequency to avoid overloading
the specified low frequency performance of your subwoofer. Sets
one of these frequencies according to the
low
frequency output
capabilities of your speakers.
• Advanced : Sets the low frequency signals to
be
output from the
signals of the respective speakers to the subwoofer.
Front, Center, Surround, Surr.
Back
40Hz/60Hz/8OHz/90Hz/1
OOHz/
11
OHz/120Hz/150Hz/200Hz/250Hz
LFE
/ LFE+Main
lmHz/90Hz/1
OOHz/11
OHz/120Hz/150Hz/200Hz/250Hz
,
When, on the
GUI
menu, "Audio Setup" -
"71
ch Audio
Out"-
"Multi
Channel" - "Speaker Configuration" - "Subwoofer"
is
set to "Yes"
(I@"'page
25).
you
can
select "LFE" or "LFE+Main".
Setting items
7.1
ch
Audio Out
Multi Channel
Setting contents
Set the speaker configuration, channel level
and
distance for multi-
channel playback.
Setting items
Set the speaker or audio
to
be output.
Setting related
to
each channel setting and other audio in the case of outputting analog
audio signals decoded by the DBP-A100.
7.1ch Audio
Out
Makes the audio setting
for output of analog 7.1-
channel audio
to
a multi-
channel amplifier.
2 Channel
To
set "7.1ch Audio Out",
set "HDMI Setup" _ "Audio Outputs multi-channel downmixed audio from the front speaker output
Setup"
on
the
GUI
menu to terminals
(FL/FR)
of the 7.1-channel audio output terminals. Make this
"2Ch" or
"Mute"
(~page
setting when outputting to a
TV
and 2-channel amplifier.
24).
'NtI.a
'N.na
The 7.1-channel audio output terminals only outputs to
FLlFR
when you
make this setting.
You
cannot select "None"
..:..:.:.=.:..:.:...:.:~-=-=-.:..:.::..~--------------------
or "No" for "HOMI Setup" 0 Speaker Configuration: Sets the speaker configuration.
- Audio Setup" - "Multi
[Front] : Sets the front speaker size.
LPCM
BM
On" - "Speaker • Larg.e :
For
use with large speakers that can adequately play back
low
Configuration"
(~page
23, frequencies.
24)
on
the
GUI
menu. •
Small:
For
use with small speakers that cannot adequately play back
low
frequencies.
[Center] : Sets the presence and size of the center speaker.
• Larg.e :
For
use with large speakers that
can
adequately play back
low
frequencies.
•
Small:
For
use with small speakers that cannot adequately play back
low
frequencies.
•
None:
Select when no center speaker is connected.
[Subwoofer] : Sets the presence of a subwoofer.
•
Y.es.:
Use
a subwoofer.
• No : Select when a subwoofer
is
not connected.
[Surround] : Sets the presence and size of the surround speakers.
•
La.rg.e.
:
For
use with large speakers that can adequately play back
low
frequencies.
•
Small:
For
use with small speakers that cannot adequately play back
low
frequencies.
•
None:
Select when surround speakers are not connected.
ISee
overleaf>
Remote control operation
buttons
SETUP
CD
.Displays the menu
·Cancels the menu
.Moves the cursor
·(Up/Down/Left/Right)
8 :Makes the setting
RETURN
o
:Returns to previous menu
25
To Next Page
Loading...
Need help?
General
