Denon LA-3500 - Page 32

-LA-3500
G) Flexible P.W.B.
To FP25011
Assembly
(J) Tilt Lever
k
@ Switch Base
'\1
I
~s,: ~ ~
['I ~ @)HeightWir ~ 1'
~ ~ I ~ ~
'V TI; BM• (1111 Motoc) "'
Screw (C)
[Pick Base]
For assembly reverse disassembly .
CD Pick Base
@ Height Link Plate
(G)
Optical Pickup /
Concave (C)
(D)
I
Cauction
II @ Washer
?ZJ
~ w(b)
@ Height Base
(Height Motor)
Figure 3
1. Insert Belt Clamper to the concave of Lead Belt Pulley,
slowly
move Belt Pulley, so that Belt Clamper appears in
the hole of Traverse Base.
2. Set Guide Shaft to Pick Base, mount Pick Base downward
to Traverse Base and secure the
Shaft Holder with a screw
(Refer to Figure
2).
Belt Clamper
32
Guide Base
.
= ·
~ ...,.,_-=
....... . ,,., .. . ...
' 6 I ,;> •
il!t
+. ; - •
. ~ ~.,
Figure 4
3. Set Pick Base to Belt Clamper position and secure the Pick
Base with a screw (Refer to Figure 1 ).