Chapter 5 Installation and Wiring
94
5.2 Wiring between Controller and Motor
For wiring between the SMT7 controller and the motor, use optional parts listed
Section 1.3 "Optional Items."
For details about wiring, refer to the Supplement for Extended-Joints Support.
5.2.1 Connecting Motor Cable
Motor cables with the length of 4, 6, and 12 m are available as options. Connect the
motor cable to the SMT7 controller via the motor branch cable.
Note: Select the motor cable to be suitable for the motor power.
(1) For 750W or less (2) For 1.5kW
Connection of motor cable
To Next Page
Loading...
