ENGLISCH • Kapitel 4 • Seite 3
4
© 2004
4.1 Lube Oil Operating Media
Producer Type of lube oil SAE class Availability
DEUTZ DEUTZ Oil TLX-10W40FE 10W-40 Europe
ADDINOL ADDINOL Super Truck MD 1048 10W-40 Europe, Asia
ADDINOL Ultra Truck MD 0538 5W-30 Europe, Asia
AGIP Agip Sigma Ultra TFE 10W-40 worldwide
Autol Valve Ultra FE 10W-40 Germany
ARAL Aral MegaTurboral 10W-40 worldwide
Aral SuperTurboral 5W-30 worldwide
AVIA TURBOSYNTH HT-E 10W-40 Germany
BAYWA BayWa Super Truck 1040 MC 10W-40 South Germany
BayWa Turbo 4000 10W-40 South Germany
BP OIL International BP Vanellus E7 Plus 10W-40 Europe
BP Vanellus E7 Supreme 5W-40 Europe
Castrol Castrol SYNTRUCK 5W-40 Europe, North America, Brazil,
Argentina, Australia, South Africa
Castrol Castrol DYNAMAX 7,5W-40 Europe, North America, Brazil,
Argentina, Australia, South Africa
CEPSA EUROTRANS SHPD 10W-40 Spain, Portugal
CHEVRON Chevron Delo 400 Synthtic 5W-40 North America
DEA DEA Cronos Synth 5W-30 Germany, Europe
DEA Cronos Premium LD 10W-40 Germany, Europe
DEA Cronos Premium FX 10W-40 Europe
ESSO Essolube XTS 501 10W-40 Europe
FUCHS EUROPE Fuchs Titan Cargo MC 10W-40 worldwide
Fuchs Titan Cargo SL 5W-30 worldwide
Fuchs Titan Unic Plus MC 10W-40 worldwide
MOBIL OIL Mobil Delvac 1 SHC 5W-40 Europe, SE Asia, Afrika
Mobil Delvac 1 5W-40 worldwide
Mobil Delvac XHP Extra 10W-40 Europe, SE Asia
Schmierölraffinerie Wintershall TFG 10W-40 Europe
Salzbergen
Shell International Shell Myrina TX / 5W-30 Europe, different
Shell Rimula Ultra description in some country
Shell Myrina TX / 10W-40 Europa, different
Shell Rimula Ultra description in some country
Texaco Ursa Super TDX 10W-40 10W-40 Europe
Ursa Premium FE 5W-30 5W-30 Europe
TOTAL FINA ELF TOTAL RUBIA TIR 8600 10W-40 worldwide
ELF PERFORMANCE
10W-40 worldwide
EXPERTY MX 1010
ELF PERFORMANCE
10W-40 Germany, Benelux,
EXPERTY MX 1012
Scandinavia, Austria
FINA KAPPA FIRST 5W-30 Europe
FINA KAPPA ULTRA 10W-40 Europe
The oils listed in the table are to be used
for the following engines and applications:
● 1013FC
● BF6M1013 FC Genset 200 kVA with open
crankcase ventilation.
● all engines in block-type thermal power
stations
● all engines in gensets operating in parallel
with the mains / with each other
● engines in harvesting machines
These are high-grade oils. In addition, most of
these oils are partly synthetic, some even
fully synthetic (5W-40), and thus achieve the
thermal stability required for the relevant
application and are distinguished by a low
tendency to cause deposits in the
turbocharger and in the charge air pipes with
enclosed crankcase ventilation.
Special case:
● BF6M1013 FC Genset 200 kVA with
enclosed crankcase ventilation.
Here only fully synthetic oils (e.g. 5W-40)
should be used.
4.1.2.1 Specific lube oil
definitions
The table will be extended as and when required.
Lube oils for engines with uprated power
and engines with high loading
To Next Page
Loading...
