EasyManua.ls Logo

Deutz 1012 - Lubrication System Maintenance

Deutz 1012
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISCH • Kapitel 6 • Seite 52
6
© 2002
Service and Maintenance 6.1 Lubrication System
6.1.1 Oil Change Intervals
z The oil change intervals are dependent on
the engine application and the quality of
the lube oil.
z If the engine runs fewer hours during the
year than stated in the table, the oil should
be changed at least once a year.
z The table refers to the following condi-
tions:
For diesel fuel: sulfur content max. 0.5
% by weight.
Continuous ambient temperatures down
to -10 °C / +14°F
z For fuels
– with sulfur content is > 0.5 to 1 %
or
– continuous ambient temperature below
-10 °C/+14°F
or
– with bio-diesel fuels in accordance with
DIN 51606-FAME the intervals between
oil changes should be halved.
z In the case of fuels containing more than
1 % sulfur, contact your service repre-
sentative.
Change the oil with the engine off but still
warm (lube oil temperature approx. 80 °C).
z If, for vehicle engines, lube oil change
intervals are determined by operating hours,
the lube oil change intervals indicated in table
6.1.1.1. equipment engines.
9682en_K06.p65 17.11.2008, 12:2052

Table of Contents

Related product manuals