Deutz 1012 - Page 69

ENGLISCH • Kapitel 6 • Seite 57
6
© 2002
2
3
4
1
6.1 Lubrication System Service and Maintenance
6.1.4 Changing Oil Filter Cup
z Switch off the engine.
z Loosen the lube oil filter cap 1 and unscrew
in an anticlockwise direction.
z Carefully lift the paper filter cartridge 3 out
of guide 4.
z Catch any dripping oil.
z Change the paper filter cartridge 3.
z Clean any dirt from the filter carrier rim and
the lube oil filter cover 1 and guide 4.
z Replace rubber seal 2 and apply a small
amount of grease
z Carefully insert the new paper filter
cartridge 3 in guide 4.
z Tighten lube oil filter cover 1 in the clockwise
direction (25 Nm).
z Start the engine.
z Check the oil level, see 6.1.2.
z Check the oil pressure, see 3.3.1.
z Check lube oil filter fitting for leaks.
Caution: hot oil!
Risk of scalding!
© 30 074 0
9682en_K06.p65 17.11.2008, 12:2057