ineo+ 353/253/203 1-127
Setup items by operation
1
1.42.4 OpenAPI Setting
In Administrator mode of Web Connection, select the Network tab - "OpenAPI Setting".
Specify the following settings.
!
Detail
To use SSL/TLS, install the certificate in advance. For details, refer to "Creating a certificate for this
machine for SSL-based communication" on page 1-7.
!
Detail
If Enhanced Security Mode is set to "ON", the "Use SSL/TLS" check box is selected.
If authentication is perfomed with Authentication Manager from the printer driver, set "Authentication"
for OpenAPI Settings to "OFF" from the control panel.
Item Definition Prior confirmation
Port Number Specify the port number.
Use SSL/TLS To use SSL/TLS, select the "Use SSL/TLS" check box. Whether to use SSL/TLS
Port No. (SSL/TLS) Specify the port number used in SSL communication.
To Next Page
Loading...
