ineo+ 353/253/203 1-37
Setup items by operation
1
1.12.4 Setting Up LDAP
In Administrator mode of Web Connection, select the Network tab - "LDAP Setting" - "Setting Up LDAP" -
[Edit].
Specify the following settings.
Item Definition Prior confirmation
LDAP Server Name Specify the name of the LDAP server.
Server Address Specify the LDAP server address. (Format: "***.***.***.***",
Range for ***: 0 to 255)
If the DNS server is specified, the address can be specified
using the host name.
This item can also be specified with IPv6.
Address of the server
Port Number Default setting: 389
Specify the port number.
Port number for the serv-
er
Search Base Specify the search starting point in a hierarchical structure
placed on the LDAP server. Searches are performed through
the directory at the starting point and subdirectories under
the directory.
Search base
Timeout Specify the maximum wait time for a search operation.
Max. Search Results Specify the maximum number of destinations to be dis-
played after a search.
To Next Page
Loading...
