DEWESOFT SIRIUS User Manual

SIRIUS®
5.8.2 CHG BNC
Illustration 99: SIRIUS-CHG: pin-out
(BNC)
Illustration 100: SIRIUS i 8xCHG
5.8.3 CHG+ (Counter) L1B7f
Illustration 101: CNT: counter pin-out
(LEMO 7pin)
Illustration 102: SIRIUS i 6xCHG, 2xCHG+
Connector type L1B7f
Connector on the module: EGG.1B.307.CLL
Mating cable connector: FGG.1B.307.CLAD52
Table 12: CHG+ counter connector type
Digital Output Configuration
The “switch” of the open collector output is closed when active.
Page 60/166 www.dewesoft.com Doc-Version: 1.4.2
DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft® DEWESoft®
measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation

DEWESOFT SIRIUS Specifications

General

Resolution	24-bit
Isolation	Channel-to-channel and channel-to-ground
Interface	USB
Software	DewesoftX data acquisition software
Bandwidth	DC to 50 kHz (depending on module type)
Humidity	non-condensing
Analog Inputs	Voltage, IEPE, Charge, Current, Strain Gage, Thermocouple, RTD, Resistance, LVDT, Bridge