Dexcom G5 Mobile - Page 75

Dexcom G5 Mobile System User Guide
73Set up Your Display Devices
(Continued from previous page)
Step What you see What you do
Setting High Alert
6b
To change value:
Press up/down arrows to change value at 10 mg/dL
increments.
Press select button to save and close.
These steps are enough to get you going; now you can start your sensor session!
Summary
Now You Can:
• Create a Dexcom username and password
• Download the G5 Mobile app
• Set up app with the recommended settings
• Successfully set up your Dexcom G5 receiver
What’s Next?
Now that you have completed setting up your app and/or the receiver, your next step is
starting a sensor session.
No matter what monitoring method you choose, starting a sensor session is the same:
• Inserting the sensor
• Attaching the transmitter
• Pairing the transmitter to your device
• Two-hour sensor warmup
• Initial calibrations