Dexcom G6 - End Sensor and Transmitter Sessions; End Your Sensor Session

Dexcom G6
®
System User Guide
207Chapter 13: End Sensor and Transmitter Sessions
Chapter 13 | End Sensor and
Transmitter Sessions
13.1 Introduction
This chapter reviews what to expect when your sessions end and how to remove the
sensor and transmitter.
After this chapter, you’ll be able to:
• Identify Replace Sensor notifications at the end of your sensor session
• Remove your sensor and save your transmitter if needed
• Replace and pair transmitter
13.2 End Your Sensor Session
When your 10-day sensor session is almost over, you get notifications letting you
know your sensor session is ending. Before you start a new sensor session, you must
remove your existing sensor.
Notifications for End of 10-Day Sensor Session
6 Hours, 2 Hours, and 30 Minutes Ahead
App: Open app to confirm.
Receiver: Tap OK to confirm.
What it means:
• Notifications let you know your sensor session is ending soon. You get three
notifications before the session ends: 6 hours before (shown below), 2 hours
before, and 30 minutes before
• Clock counts down until session ends
• Continue to get alarm/alerts and G6 readings
• You can end session early or wait