Operating instructions, SM-110/-111
Safety
11
4
4.3 General safety instructions
WARNING
RISK OF INJURY DUE TO INCORRECT HANDLING
The incorrect handling of the machine (e.g. reaching into abra-
sives or polishes) may cause blunt injuries, abrasions or burns.
The machine may only be used by people who
➾ have read and understood the operating instructions,
➾ are familiar with the start-up, operation and maintenance
of machines and the applicable accident prevention regu-
lations,
➾ recognise the dangers that occur during work and work
reliably,
➾ do not operate the machine outside the given power ranges
(see 5.1 Technical data),
➾ only operate the machine according to the approved appli-
cations (see 4.2 Intended use).
WARNING
RISK OF INJURY IN UNSUITABLE ENVIRONMENTS
Poor or excessively dark lighting or inadequate space to work
may cause injuries.
Only use the machine
➾ in good lighting conditions,
➾ with adequate space to work.
To Next Page
Loading...
