Dick SM-110 - 6 Putting the Machine into Operation; Installing the Machine

Operating instructions, SM-110/-111
Putting the machine into operation
18
6
6 Putting the machine into operation
6.1 Installing the machine
WARNING
RISK OF INJURY IN THE EVENT OF SLIPPING,
FALLING OR TILTING MACHINE
A slipping, falling or tilting machine can fall on hands or feet
and cause serious injury.
➾ Only place the machine on a stable, load-bearing table or
other base that can support the weight of the machine.
➾ Thestandmustnotbemobileorttedwithwheelsorcas-
tors.
➾ Themachinemuststandonaat,non-slipsurface.
WARNING
RISK OF INJURY DUE TO IMPROPER POSTURE
A posture in which you cannot keep your balance or have to
bend can lead to falling onto or into the machine or to tipping
over with the machine, resulting in serious injuries.
➾ Always adjust the height of the base to the height of the
operator to ensure work is carried out in an upright posture
with a secure footing that allows balance to be maintained.
➾ Keep the area around the machine free from other equip-
ment and bulky objects.
Only for SM-111
NOTE
PROTECT THE POLISHING WHEEL AGAINST
MOISTURE
The polishing wheel swells when wet and becomes unusable.
➾ Store the polishing wheel in a dry place and protect it against
moisture.
Set up the machine at a non-slip, stable workplace with sufcient lateral
clearance.