Dick SM-110 - Default Chapter; Table of Contents

Operating instructions, SM-110/-111 3
Contents
1 User Information 5
1.1 General 5
1.2 Symbols and conventions 5
1.2.1 Instructions 5
1.2.2 Lists 5
1.2.3 Courses of action 6
2 Scope of supply 7
2.1 Package contents 7
2.2 Unpacking the machine 7
3 Environmental protection 8
4 Safety 9
4.1 Meaning of the warnings 9
4.1.1 Identicationofrisksofinjury 9
4.1.2 Identicationofpropertydamage 9
4.1.3 Identicationofadditionalinformation 9
4.1.4 Symbols for the safety instructions 9
4.2 Intended use 10
4.3 General safety instructions 11
4.4 Information signs on the machine 12
5 Design and function 13
5.1 Technical data 13
5.2 Design of knife grinding and honing machine SM-110 and
SM-111 16
5.3 Function 17
6 Putting the machine into operation 18
6.1 Installing the machine 18
6.2 Filling cooling water 20
6.3 Connecting the machine 21
6.4 Adjusting the machine 22
6.4.1 Adjusting the knife guides (grinding angle) 22
6.4.2 Setting the honing wheels (only SM-111) 23
6.5 Control elements on the machine 24
6.6 Switching on the machine 25
6.7 Switching off the machine 27