Dick SM-110 - 2 Scope of Supply; Package Contents; Unpacking the Machine

Operating instructions, SM-110/-111
Scope of supply
7
2
2 Scope of supply
2.1 Package contents
• Machine
• Operating instructions
• Short operating instructions
• Set of tools
• Dressing spindle complete
• Polishing paste (only for SM-111)
• Declaration of conformity (for 230 V version)
2.2 Unpacking the machine
1. Unpack the machine immediately after purchase
2. Check whether the machine has suffered any defects or damage during
transport.
➾ Keep the original box for any necessary returns in order to prevent
transport damage.
3. Check the package contents to ensure that the delivery is complete.
➾ Report missing parts/defects to your specialist dealer immediately.
Complaints made at a later date can no longer be recognised.
➾ Keep the invoice during the warranty period as proof of purchase.
4. In case of complaints, write to your specialist dealer, enclose the original
invoice and a precise description of the actual defects.
5. Before returning the product, wait for the specialist dealer's reply in order
to initiate the necessary steps.
➾ Friedr. Dick GmbH & Co. KG does not pay any transport costs for
returns that have not been explicitly approved.
IMPORTANT
DAMAGE IN CASE OF INCORRECT CONNECTION
DATA
If the machine's connection data do not match those on site,
the machine may be damaged.
➾ Verify the connection data before putting it into operation
forthersttime(see"Typeplate").
➾ Do not put the machine into operation if the connection
values on site are higher.