Digi SM-500MK4 DP - 4. INITIAL SETUP; 4.1 Scale Assembly; 4.2 Software Setting

SM500MK4 Service Manual
9
VOID KEY
* Correct the Sales Data
PLU KEY
* Call up PLU data.
* Store the programmed data in S mode.
FEED KEY
* Feed Label or Receipt
PRINT KEY
* Print out Label or Receipt
MODE SELECT KEY
* Five Modes can be selected using this key.
Indicator R - REGISTRATION MODE (All the sales transactions are
performed.)
Indicator X - CHECK MODE (Printing out and sales report.)
Indicator S - PROGRAM MODE (Programming preset data, such as
products, data, shop name, etc.)
Indicator Z - TOTAL MODE (Clear sales data stored.)
Indicator X (Blink) - PASWORD SETTING MODE (Setting ENTRY
PASSWORD for S, X and Z modes.)
PRESET KEYS
to
* Call up Preset data such as PLU Data or Function Data in Reg.
Mode.
* Enter Alphabetic data in Program Mode.
Note: The following Preset Keys are used in entering Alphabetic (Pole Type).
Move the
cursor.
Change the
entry to
Right.
Move the
cursor.
Change the
entry to Left.
Code type
entered.
Insert Data. Switch Cap /
Lower case.
Change Font
size.
Delete the
Data.
All manuals and user guides at all-guides.com