Digi SM-500MK4 DP - Page 65

SM500MK4 Service Manual
62
SPEC 38: SELECTION OF RECEIPT PRINT DENSITY
0: LOW
1: MID
2: H. MID
3: HIGH
SPEC 39: SELECTION OF PLU CALLING
0: MANUAL
1: AUTO
2: TIME-OUT
SPEC 40: SELECTION OF PLU DIGITS FOR AUTO PLU TIME OUT CALLING
0: 3 DIGITS/0.5 SEC
1: 4 DIGITS/1.0 SEC
2: 5 DIGITS/1.5 SEC
3: 6 DIGITS/2.0 SEC
SPEC 41: U. PRICE OF WEIGH-PLU CAN USE FOR PRICE OF NON-WEIGH PLU AND VICE VERSA
0: ALLOW
1: INHIBIT
SPEC 42: UNIT PRICE OVERRIDE
0: ALLOW
1: INHIBIT
SPEC 43: MAIN USAGE FOR COMMODITY NAME, SHOP NAME AND SPECIAL MESSAGE ( LABEL /
RECEIPT )
0: RECEIPT
1: LABEL
SPEC 44: TARE OVERRIDE
0: ALLOW
1: INHIBIT
SPEC 45: ITEM PRINTING
0: ALLOW
1: INHIBIT
SPEC 46: DEFAULT DATA OF PRINTING SHOP NAME NUMBER FOR LABEL
(0 - 32)
SPEC 47: DEFAULT DATA OF PRINTING SHOP NAME NUMBER FOR RECEIPT
(0 - 32)
SPEC 48: SETTING OF SCALE NUMBERS
(1 – 999999)
SPEC 49: SELECTION OF CLIENT/SERVER INTERFACE
0: NO INTERFACE
1: ETHERNET - COAXIAL CABLE
2: ETHERNET - TWISTED CABLE
3: NOT USED
4: 4 LINES, RS485
SPEC 50: SELECTION OF SERVER / CLIENT
0: CLIENT
1: SERVER / WORKSTATION
2: BACK-UP SERVER
SPEC 51: SELECTION OF BAUD RATES ( SIO )
0: 1200
1: 2400
2: 4800
3: 9600
4: 19200
5: 38400
All manuals and user guides at all-guides.com