Digi XBEE-PRO S3B - NB (Parity); SB (Stop Bits)

AT commands Serial interfacing commands
XBee®-PRO 900HP/XSC RF Modules
92
Value Description
0x1 2,400 b/s
0x2 4,800 b/s
0x3 9,600 b/s
0x4 19,200 b/s
0x5 38,400 b/s
0x6 57,600 b/s
0x7 115,200 b/s
0x8 230,400 b/s
Default
0x03 (9600 b/s)
NB (Parity)
Set or read the serial parity settings for UART communications.
Parameter range
0x00 - 0x02
Parameter Description
0x00 No parity
0x01 Even parity
0x02 Odd parity
Parameter Description
0 No parity
1 Even parity
2 Odd parity
Default
0x00
SB (Stop Bits)
Sets or displays the number of stop bits in the data packet.
Parameter range
0 - 1