UTM-00339 | Rev 19
Page 50 of 253
DetNet South Africa Copyright © 2021
connected to a USB cable / charger, where a charging current of up to 1A is readily obtained.
The recommended Qi chargers are as follows:
• Belkin wireless charger: F7U050
• Samsung wireless charger: EP-PG920I
• Samsung wireless charger: EP-NG930
Once the battery has discharged to 9%, the CE4 Tagger will display the message icon
in the top bar indicating a possible low battery condition. (The message Icon is active for
any fault condition).
• Press button to view Notifications screen.
• Screen will display Low Battery!
• Press Exit SoftKey to return to previous screen.
The user may navigate to the System information screen (detailed in paragraph 6.1.2) to check that the CE4
Tagger is being charged and to verify the state of health of the battery.
IT IS RECOMMENDED THAT THE CE4 TAGGER BE CHARGED TO 50% WHEN PLACED INTO STORAGE, AND
THEREAFTER THE UNIT SHOULD BE CHARGED AT LEAST EVERY SIX MONTHS TO 50%, TO MAINTAIN THE
EXPECTED LIFETIME OF THE BATTERY. REFER TO CE4 TAGGER STORAGE MODE UNDER ADVANCED
SETUP FOR MORE DETAIL.
To Next Page
Loading...