UTM-00339 | Rev 19
Page 79 of 253
DetNet South Africa Copyright © 2021
This function enables the user to set the maximum detonator wire length on a particular string. When the total
detonator wire length on a particular string exceeds the set maximum wire limit, a system notification warning will
be triggered.
1. Main Menu
• Press SoftKey to select Configuration Settings.
2. Configuration Settings Menu
• Press to select Advanced Setup.
3. Advanced Setup Menu
• Press to select Max Wire length
4. Max Wire length
• Use numerical keypad to enter maximum wire length.
• Default is 10000m
To Next Page
Loading...