UTM-00339 | Rev 19
Page 80 of 253
DetNet South Africa Copyright © 2021
This function enables the user to reconcile the total amount of detonators tagged using more than one Tagger.
The main Tagger will be set as a Master Tagger which will provide access point to the other Taggers. This function
must be carried out after tagging has been conducted and all the other detonators that were not tagged should be
deleted from the Taggers.
1. Select Reconciliation function to be Enabled or Disabled
2. Press Softkey to save
Refer to Para 10.3.12 for more detail on the use of the
Reconciliation function.
To Next Page
Loading...