The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
18
Dashboard Fitting
Clean the dashboard surface that the bracket is to
be • xed to with a clean cloth with alcohol or a suit-
able cleaning (de-grasing) solution
Place the bracket in position without removing the
protective • lm.
Carefully model the bracket wings to • t the dash-
board.
Make sure the surface is grease and polish free.
Press the bracket wings down into position on the
dashboard.
Remove the protective • lm from the glue pad on the
base of the bracket.
1 2
3
5
4
6
To Next Page
Loading...