The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
46
Programming Keys
Programming Keys
Service Programming Keys
The X-ONE Android taximeter has 6 types of different “Service Programming Keys”. Depending on what have to be
modi• ed or programmed it may be used one of these six keys.
Each key is indenti• ed with a label: “SProgK(X)” where X is the number of the key for its own purpose as detailed in this
document. Is not possible to use a programmed key for its own purpose to be use for another kind of service.
All these 6 types of Service Programming Keys are inserted in the same connector that is mechanical sealed as shown in
the picture below and as explained in page 5 of this technical manual. So to insert whatever key is necessary to break • rst
the mechanical seal.
Here following is detailed the use for each key:
Service Programming Key 1 – SProgK1 Service Programming Key 2 – SProgK2
Function:
- Clock setting
- K-Constant Calibration
Function:
- Tariff Programming (Manually)
- Counters / Memories Reset
Service Programming Key 3 – SProgK3 * Service Programming Key 4 – SprogK4
(Black Programming Key)
Function:
- Tariff Set Up Download
Function:
- Serial Port Remote Tariff / Bios Upload Enabling
Service Programming Key 5 – SProgK5 * Service Programming Key 6 – SProgK6 *
Function:
- Download Display Texts
Function:
- Download Printer Texts
* Service Programming Keys 3 / 5 / 6: Set up are included in the general tariff checksum
Views
To Next Page
Loading...