The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
6
X-One Android Taximeter
The new X-One Android device is industrial grade and automotive certificate mobile data terminal with stand-alone embedded taximeter.
FULLY CERTIFIED EMBEDDED TAXIMETER Special features:
The Taximeter runs on a dedicated standalone CPU, which make possible to certify the sole taximeter independently than Androids system and apps
leaving free developers to keep updated their android application without involve taximeter certifications.
Furthermore the taximeter, been based on completely HW & SW CPU independent from Android system, will continue fully working even in case of
android freeze, restarts, shut down ecc.
The mechanical buttons and printer are HW connected directly to the taximeter CPU, so in case android freeze or corrupts, as in this event the display
and touchscreen will be not working, the taximeter can still be operated from mechanical bottoms and the journey amount and data printed on the receipt.
The custom Digitax/Android OS, do not allow to any application to overwrite the reserved windows for the traximeter.
Digitax’s new generation device provided with multi-mode LTE Cat.4 module and Android 6.1/7.1 OS. It includes short-range wireless communication via
Wi-Fi 802.11b/g/n and BT4.1 LE, and offers data rates up to 150 Mbps.
The device also combines high-speed wireless connectivity with embedded multi-constellation and high-sensitivity GPS+GLONASS+BeiDou receiver
for positioning.
A rich set of interfaces ad devices (embedded double Camera 2 and 5 Mpix,and or external ethernet IP Camera 7” Graphic display at 1024x800 resolution
provided with capacitive Touch Panel, internal mic and speaker and or external microphone inputs and speaker audio outputs, a huge sets of UART
peripherals), extend its functionalities the and permits the use of this devices in a wide range of applications and cases.
DUAL CPU
Primary CPU: Qualcom Quad Cortex 1.4GHz processor with Adreno 304 GPU, OpenGL ES 3.0, OpenCL, DirectX, content security and QDSP6 DSP
inside, allows this Device to supply a remarkable flexibility and efficiency in computing power, together with reduced power consumption.
Secondary CPU: AITP (Automotive Intensive Task Processor) dedicated to the embedded taximeter furthermore supplies the necessary functionalities in
the automotive field, like power management, Safe Shutdown, Wheel Pulses Odometer, Distance and Speed calculation, Wake-Up on Ring, Over-the-Air
services for software and firmware updates. The AITP is OTA programmable for remote automatic firmware and tariff upgrade, and is always powered
ON; it can turn-ON and OFF the Device and its peripherals.
IDEAL FOR FLEET MANAGEMENT AND TAXIMETER JOB DISPATCHING
The Device represents the state-of-the-art device for job dispatching certified taximeter, security and fleets management, an ALL-IN-ONE industrial grade
and automotive compliant, powerful and compact solution.
Its 4G LTE modem allows very reliable communication with operating headquarters.
The vehicle is located by the high performance GPS/GLONASS/BeiDo receiver.
CUSTOMIZABLE USER INTERFACE
The 7 inches 16:9 clear readable TFT Displays with HD 1024x800 @60fp resolution allow to develop versatile and high accessible applications, thanks
also to the integrated TouchScreen controller, and to the 6 keys with LEDs available.
Hardware Keys avoid consumption and damage of Touch Screen for heavily used operations.
to choose The ambient light sensor allows an optimal brightness of the display in any environmental light.
The power key is a Smart Power Button, completely programmable and used to perform several important tasks.
Can be also disabled or programmed to trigger Ghost Mode (fake shutdown).
STEALTH MODE
Stealth mode is a special operating mode in which the system is working but the display and audio is OFF.
This feature can be useful in several situations:
Driver Control: System has also the wake up on ring feature, so at the central it is possible to remotely turn-ON the device (also in stealth mode so nobody
can see that it is starting) in order to check vehicle position, internal audio listening and other data.
Ghost Mode: It is possible to set the device so that after pressing the shut down but on the system goes on stealth mode instead of turning OFF. This
feature is useful if you want the device to remain always ON (it turns OFF only the display, reducing power consumption)or in an alarm situation.
Alarm managing: If system is OFF and alarm but on is pressed the system can be started in stealth mode, so nobody can see that the system starts.
On this special start the system can be programmed for example to send an alarm message to the central, GPS position or also screenshots or audio..
HIGH AVAILABILITY
The Device has been designed for professional automotive application, it is fully automotive certified, can withstand glitches at car engine start, over
voltage up to 32V and immunity to ESD and EMC interferences
The AITP processor gives time to user applications and Android O.S. to close gracefully and safely in case of sudden disconnection of the Main Power.
INPUTS AND OUTPUTS
The Device supplies a wide range of communication channels with the external environment: Hi-Speed USB 2.0 Host, one USB Device and up to 7 RS232
and RS485 Serial Ports.
The special programmable digital inputs and outputs allow to control devices and read signals coming from generic external equipment’s.
To Next Page
Loading...