The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
45
The “ProgDate”
“Progdate” is a kind of taximeter programming based on time events. This means that is possible to de• ne a
period of time during which a particular action is performed by the taximeter.
The X-ONE Android taximeter can be programmed with up to 50 Progdate records, every one with different
activation times or action to be performed.
The activation date of every record can be one of the following:
• from a start date to an end date
• a speci• c date of every year
• a speci• c day of every month
• some speci• c days of every week
It is also possible to specify a time period during the activation days, de• ned by a start time and an end time
(for example from 12.00 to 15.00 to identify the peak hour).
When the Progdate is activated, a programmed action is performed by the meter. Some are pre-de• ned, with
• xed meaning, some other are referred to the X-ONE Android programming questions. These are the possible
actions codes, with their meaning:
Night Time = ProgDate 1
Holiday Time = ProgDate 2
actions identi• ed by Question 63 to Question 73 of the meter programming. = ProgDate 3
actions identi• ed by Question 74 to Question 84 of the meter programming. = ProgDate 4
actions identi• ed by Question 85 to Question 95 of the meter programming. = ProgDate 5
actions identi• ed by Question 96 to Question 106 of the meter programming. = ProgDate 6
actions identi• ed by Question 107 to Question 117 of the meter programming. = ProgDate 7
actions identi• ed by Question 118 to Question 128 of the meter programming. = ProgDate 8
Maintenance Expired = ProgDate 14
Winter / Summer Time = ProgDate 15
Dimmer Time = ProgDate 16
logo to print (only with Printer and speci• c • rmware releases) = ProgDated 17 to 28
Actions related to the programming Questions can be an absolute or relative block jump, a cost percentage or
delta difference in the costs, or other similar actions.
Please refer to the X-One Android manual for a detailed explanation of the effects of every speci• c one.
It is possible to program a tariff in advance, by writing its parameters in a not active block of the tariff grid.
This pre-programmed tariff can be activated at the time and date speci• ed by a progdate, using the absolute
block jump action or relative block jump action, so that the execution could jump to the block of the pre-pro-
grammed tariff.
To Next Page
Loading...