Digitax X-one - ?E-Seal”- Electronic Sealing; 2 Nd Section; E-Seal- Electronic Sealing

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confi dential. Any disclosure, copying, distribution to third
party is strictly prohibited.
28
“E-Seal”- Electronic Sealing:
2nd Section
By pressing F3 key in the E-Seal Mode is possible to read the second section.
Press F5 to go to the next event, press F4 to go to the previous event. Press F1 to exit. It can be displayed in the following
format:
K4
K2
Exit to the main menù
PAIRING event is shown but is never generated
K-CONS 0
ESeal
event counterevent type
A.DEFL 0
ESeal
event counterevent type
TARIFF 0
ESeal
event counterevent type
SYN.CL 0
ESeal
event counterevent type
TICKET 0
ESeal
event counterevent type
M.E.S. 0
ESeal
event counterevent type
CL.MEM 0
ESeal
event counterevent type
DEFAUL 0
ESeal
event counterevent type
LB.RES 0
ESeal
event counterevent type
AVAIL 0
ESeal
event counterevent type
LIGHTS 0
ESeal
event counterevent type
PAIRIN 0
ESeal
event counterevent type
K4
K3
K4
K3
K3
K4
CLOCK 0
ESeal
event counterevent type
K4
K3
K4
K3
K4
K3
K4
K3
K4
K3
K4
K3
K4
K3
K3
K4
AVAIL 0
ESeal
event counterevent type
BIOS 0
ESeal
event counterevent type
K4
K3
K4
K3
K4
K3
OP
Note:
At any event position by pressing F2 the E-Seal counters report will be
printed Press F3 at anytime to come back to the E-Seal fi rst section