Dinli DL702 - Page 43

【4-10】
S
USPENSION/STEERING
● Drain oil by removing the oil drain plug [3], oil filter plug [2] and
oil level plug [1].
● Tighten the oil drain plug [3] to the specified torque and pour
fresh oil through the oil filter hole until it overflows from the oil
level hole.
● Tighten the oil level plug [1] and oil filter plug [2] to the specified
torque.
● Install the front under protector.
Rear Driver Gear Oil Specification:
Hypoid gear oil SAE#80, API grade GL-5