Dinli DL702 - Periodic Maintenance Chart

【1-8】
GENERAL I
N
F
ORMATIO
N
Periodic Maintenance Chart
Perform a Pre-Ride inspection before every ride and at schedule maintenance periods.
C=Clean
R=Replace
L=Lubricate
I=Inspect, Verify, Clean, Adjust, Lubricate, Replace if necessary
Regular Maintenance Internal
Interval
Items
Break in Initial week
Every 1
month
Every 3
month
Every 6 month
Note
First hour
After 10
hours
Every 10 Every 50 Every 100
0 Initial 200 Every 200 Every 1000 Every 2000
WARNING LABELS (condition, readable) I I I I I I
AIR FILTER I C C ★
FRAME (mainframe, subframe) I I I
FUEL LINE I I I Replace every four years
▲ THROTTLE OPERATION I I I I I
SPARK PLUG I Replace every 6000 km
○ IDLE SPEED I I
ENGINE OIL I R R
▲ ENGINE OIL FILTER (s) C R R
DIFFERENTIAL GEAR OIL I Replace every two years
FINAL GEAR OIL I Replace every year
COOLANT I I I Replace every two years
SWITCHES (engine, stop, start, tether, ignition) I I ★
BRAKE FLUID I I I Replace every two years
▲ BRAKE SYSTEM (cables, discs, pads, hosed, etc.) I I I I I ★
BRAKE DISCS I I I I Replace every 10000 km
▲ LIGHTING (headlight, tail light, turning lights) I I
BATTERY (terminals) I,C
▲ EXHAUST (spark arrester) C
SUSPENSION I I I
NUTS, BOLTS AND FASTENERS I I I I
▲ WHEELS/TIRES (pressure, condition, wear) I I I
▲ Steering assembly (fasteners, operation) I I I I ★
General Lubrication L L L
▲DINLI dealer service suggested servicing owners should have the proper tools, service data, and be mechanically qualified.
○Operational safety involved. The service should be performed by a DINLI dealer.
★Service more frequently if operation in dusty, sandy or snowy area or conditions.
Day/Months
Hours
km