Dinstar DAG2000-32 - Page 18

DAG2000 Series FXS Voice Gateway User Manual
13
Dinstar Technologies Co., Ltd.
Table 4.3-1 System Information Description
MAC address
WAN port hardware address. The device ID in HEX format.
IP Address
Shows LAN IP address of DAG ,
DHCP mode: all the field values for the Static IP mode are not used (eventhough they
are still saved in the Flash memory.) The DAG acquires its IP address from the first
DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The DAG wille stablish a
PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address,
DNS Server 1 (primary), DNS Server 2 (secondary) fields. These field sare set to zero
by default.
DNS Server
Display DNS server IP address and default gateway information
System Uptime
Time elapsed from device power on to now.
Network Traffic
Statics
Total bytes of message received and sent by network port.
Version
Includes: product mode, software version, hardware version and built time etc.