EasyManua.ls Logo

Dinstar DAG2000-32 - Routing Configuration

Dinstar DAG2000-32
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DAG2000 Series FXS Voice Gateway User Manual
39
Dinstar Technologies Co., Ltd.
number in DAGs and also receiving incoming calls from other peer to peer gateway. IP trunk is
help to DAGs establish peer-to-peer call between DAGs and other VoIP phones. IP trunk will be
used in routing configuration.
Figure 4.9-2 IP Trunk Configuration Interface
Index
IP trunk number, it is range from 0 to 63
Description
The description of IP trunk,its purpose is so you can identify the IP trunk with a
meaningful name
Remote Address
Peer IP address or domain name
Remote Port
Peer SIP port
Heartbeat
Default is disable, if enable, DAG will send OPTION to peer device
4.9.3 Routing Configuration
Figure 4.9-3 Routing Parameter Configuration Interface
This option determines the following routing of call take effect before or after manipulation.

Related product manuals