Transport - 112 JT100/JT100 All Terrain Operator’s Manual
Haul
Tie Down
Points
Tiedown points are identified by tiedown decals. Securing to trailer at other
points is unsafe and can damage machinery.
Procedure
Ensure driver/loader is in stowed position and stow strap (2) is tight. Ensure anchor drive motor is in
stowed position (1). Loop tiedowns around unit at tiedown points. Make sure tiedowns are tight before
transporting.
IMPORTANT: Ensure that the trailer tie down location is not more than 18” (45.72 cm) in front or behind
machine tie down. You must use five total tie downs, two per side and one over the drill frame to meet
standards.
To Next Page
Loading...
