Controls - 58 JT100/JT100 All Terrain Operator’s Manual
Right Control Console
Controls
1. Dual speed carriage control
2. Drilling fluid quick fill switch
3. Drilling fluid pump switch
4. Track and carriage control
5. Shutdown override switch
6. Ignition switch
7. Remote engine stop switch
Item Description Notes
1. Dual speed carriage
control
To increase carriage travel
speed, push and hold.
To return to normal carriage
speed, release.
Use during bore or pullback when no
pipe is in spindle to save time.
IMPORTANT: Drill/drive selector must
be in drill position.
To Next Page
Loading...
