Ditch Witch JT100 - Tethered Driver;Loader Control

Controls - 32 JT100/JT100 All Terrain Operator’s Manual
Tethered Driver/Loader Control
Tethered Driver/Loader Control
1. Power switch
2. Remote engine stop switch
3. Auxiliary control switch
4. Anchor driver control switch
5. Extension control switch
6. Driver/Loader arm swing control switch
7. Outer boom control switch
8. Inner boom control switch
9. Speed control
IMPORTANT:
• Tethered driver/loader controller will not work if operator is in drilling unit seat and driver/loader
enable switch is not enabled.
• Before operating driver/loader, release stow strap on driver/loader boom.
j28om013t.eps
12
3
4
5
6
78
9