Conduct a Bore - 130 JT100/JT100 All Terrain Operator’s Manual
Record Bore Path
Record Bore Path
Locate drill head every half-length of pipe. As the job is completed, record the actual data for each drill
pipe. List pitch and depth of each joint and a brief description of the procedure. In addition, draw a simple
sketch of the site and record depth and rough location of pullback.
Subsite
®
Electronics bore tracking software is also available for plotting and tracking your bore path. It
utilizes a Subsite Electronics tracking system, including a tracker, display and tracking beacon, and special
software. The display can store jobs in its memory or the system can be run in the field using a laptop
computer. See your Ditch Witch
®
dealer for details.
To Next Page
Loading...
