Ditch Witch JT100 - Left Control Console; Pipeloading Controls

JT100/JT100 All Terrain Operator’s Manual Controls - 37
Left Control Console
Left Control Console
Pipeloading Controls
1. Shuttle stop switch
2. Add pipe/manual/remove pipe switch
3. Pipe lift switch
4. Pipe gripper switch
5. Pipe shuttle switch
6. Front frame tilt switch
7. Back frame tilt switch
8. Pipe lubricator switch
9. Front wrench clamp switch
10. Rear wrench clamp switch
11. Rear wrench rotation switch
Item Description Notes
1. Shuttle stop switch To lower shuttle stop,
press
To raise shuttle stop,
press
IMPORTANT: Look at pipe row
indicator on drill frame to see which
row shuttles will stop under.
IMPORTANT: Shuttles will not
function unless shuttle guard bar on
outside of pipe box is in operating
position.