Controls - 34 JT100/JT100 All Terrain Operator’s Manual
Tethered Driver/Loader Control
6. Outer boom control
switch
To lower, push up and press
speed control.
To raise, push down and
press speed control.
To stop, release switch or
speed control.
7. Loader/Driver arm
swing control switch
To swing counterclockwise,
push to left and press speed
control.
To swing clockwise, push to
right and press speed control.
To stop, release switch or
speed control.
IMPORTANT: Arm will not swing more
than 360°.
8. Extension control
switch
To extend, push up and press
speed control.
To retract, push down and
press speed control.
To stop, release switch or
speed control.
9. Speed control To start any driver/loader
function, pull gently.
To increase speed, pull closer
to handle.
To stop, release.
Item Description Notes
To Next Page
Loading...
